Need help?Do you have a question about the Kostal PIKO 10 and is the answer not in the manual?
General| Max. input voltage | 1000 V |
|---|---|
| MPP voltage range | 200 V - 800 V |
| Number of MPP trackers | 2 |
| Protection class | IP65 |
| Warranty | 5 years |
| Max. AC power | 10000 W |
| AC nominal voltage | 230 V |
| Frequency | 50 Hz |
| Max. apparent AC power | 10000 VA |
| Maximum AC output power | 10000 W |
| Operating temperature range | -25 °C - +60 °C |
Describes the intended use and limitations of the PIKO inverter.
Details site selection and mounting requirements for the inverter.
Explains how to connect the inverter electrically to the grid and PV modules.
Covers connecting PV strings, including parallel connections and safety.
Guides through the startup and initial configuration process of the inverter.
Step-by-step instructions for powering up the inverter.
Instructions for safely powering down the inverter.
Detailed safety procedure for completely de-energizing the inverter before maintenance.
Details functions and settings accessible via the installer's service menu.
Lists and explains various event codes and troubleshooting measures.
Explains computer settings and prerequisites for accessing the Webserver.
Step-by-step guide for connecting the inverter to a computer via Ethernet.
Instructions on how to launch and log into the inverter's Webserver interface.
Details the electrical wiring for enabling self-consumption control.
Guides through configuring self-consumption settings via the Webserver interface.
Outlines routine maintenance tasks and their frequency for the inverter.
Provides detailed specifications for the inverter's input and output parameters.
To Next Page
