KRain KRX8 - Setting up Your KRX8 in Holman Home

16 of 40
Installation
Setting up your KRX8 in Holman Home
1. Set up the ZONES
i. Name each ZONE
ii. Choose the
WATERING MODE–
NORMAL (default)
or MISTING
® For MISTING, set
the desired ON TIME
and DELAY TIME
iii. Decide which ZONES
are to be included
in a WATERING
DELAY (not included
by default)–refer to
ZONE SETTINGS for
more information
2. Set up the STARTS
i. Enable each START
ii. Choose the START
TIME and WATERING
ROSTER
® For INTERVAL DAYS,
note the DEVICE
INFORMATION
screen will list how
many days to water
iii. Select the appropriate
ZONES and amend
the RUN TIMES