Kramer FC-400 - 6 Technical Specifications; Table 5: Technical Specifications of the FC-400 Time Base Corrector; Synchronizer

Technical Specifications
9
6 Technical Specifications
Table 5 includes the technical specifications:
Table 5: Technical Specifications
1
of the FC-400 Time Base Corrector / Synchronizer
INPUTS:
1 composite video - 1 Vpp / 75 on a BNC connector
1 YC - 1 Vpp/75 (Y), 0.3Vpp/75 on a 4p connector
1 SYNC (Genlock): Looped 75 / Hi-Z on BNC connectors
OUTPUTS:
1 composite video - 1 Vpp / 75 on a BNC connector
1 YC - 1 Vpp/75 (Y), 0.3Vpp/75 on a 4p connector
1 SYNC on a BNC connector
VIDEO STANDARDS: PAL B and NTSC 3.58
DIGITAL RESOLUTION: 10 bits
BANDWIDTH (-3dB): 0.5dB to 5MHz, Fully Loaded
DIFF. GAIN: 1%
DIFF. PHASE: 1%
K-FACTOR: 1%
S/N RATIO: 63dB
LUMA NON-LINEARITY: 1%
CHROMA / LUMA DELAY: 1ns
CONTROLS: Front-panel and RS-232; SCH phase, SYNC phase, panel lock
POWER SOURCE: 12 VDC 270mA (maximum)
DIMENSIONS: 22cm x 18cm x 4.5cm (8.6” x 7” x 1.8”), W, D, H.
WEIGHT: 1.2 kg. (2.65 lbs.) approx.
ACCESSORIES: Power supply, Null-modem adapter
1 Specifications are subject to change without notice