Kramer KT-208 - Changing the Automated Firmware Update; Changing the Time of the Automated Firmware Check

Kramer Electronics Ltd.
KT-208 / KT-208WM – Contents
17
Changing the Automated Firmware Update
KT-208 / KT-208WM arrive preset to check for firmware (tablet OS) updates at midnight every day.
If an update is found, the device will download the update file and install it. If you prefer to run
manual updates, you must manually download the update file and then install it in the tablet.
Changing the time of the automated firmware check
1. From the Home page, open the Settings screen .
2. Select Firmware update and then select Remote firmware upgrade URL.
Remote firmware upgrade URL is the site from which the firmware is downloaded.
The upgrade URL (case sensitive): https://cdn.kramerav.com/web/apk/remote_app_update_xml
Figure 6: The Firmware update page
3. A pop-up opens, inviting you to set the check time:
Figure 7: The Remote firmware upgrade URL page
4. To change the time that the system checks for updates, press Set check time and select a
new time.
5. Press OK to close the window and then press SET.
Changing (or clearing) the URL will disable the updates.