Kramer KT-208 - Defining KT-208; KT-208 WM 8 Touch Panel

Kramer Electronics Ltd.
KT-208 / KT-208WM – Contents
6
Defining KT-208 / KT-208WM 8"
Touch Panel
This section defines KT-208 / KT-208WM.
Figure 1: KT-208 / KT-208WM 8" Touch Panel
#
Feature
Function
Display
Touch panel
Microphone
For audio communication, recording or conferencing.
Recessed Restart Button
Located on the top-side. Insert a pin and hold for a few seconds to
restart.
Home Button
Press to wake up / darken the screen.
Camera
For remote room viewing or video conferencing.
Light Sensor
Automatically adjusts the screen brightness and camera according to the
room lighting conditions.
Speakers
To output the sound.
LAN 1G(PoE) RJ-45 Port
Connect to the LAN for network communication.
KT-208 and KT-208WM are powered by PoE (power over ethernet)
delivered through the LAN port.
Optionally, you can connect the power adapter too (as backup).
12V/1A DC Connector
Connect to the power adapter (optional, purchased separately).
Restore Factory Reset Button
Insert a pin and hold for 22 seconds to reset the device to factory default
values.
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware
upgrade.
1
2
3
4
5
6
7
8
9
10
11