Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 About the Power Connect™ Feature 3
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 3
3.3 About the TP-112HD 4
3.4 Recommendations for Achieving the Best Performance 4
4 Your TP-112HD XGA/HD Line Transmitter – DA 4
5 Configuring a 1:2 XGA/HD-to-Twisted Pair DA System 6
5.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors 9
6 Technical Specifications 9
Figures
Figure 1: TP-112HD XGA/HD Line Transmitter – DA 5
Figure 2: TP-112HD (Top Side Panel) 5
Figure 3: TP-112HD (Lower Side Panel) 5
Figure 4: TP-112HD (Underside Panel) 6
Figure 5: Configuring a 1:2 XGA/HD to Twisted Pair Transmitter/Receiver/DA 8
Figure 6: CAT 5 PINOUT 9
Tables
Table 1: TP-112HD XGA/HD Line Transmitter - DA Features 5
Table 2: TP-112HD (Underside Panel) Features 6
Table 3: CAT 5 PINOUT 9
Table 4: Technical Specifications of the TP-112HD (with 100m CAT 5 cable) 9
To Next Page
Loading...
