Kramer TP-112HD - Figure 1: TP-112 HD XGA;HD Line Transmitter - da; Figure 2: TP-112 HD (Top Side Panel); Figure 3: TP-112 HD (Lower Side Panel); Table 1: TP-112 HD XGA;HD Line Transmitter - da Features

Your TP-112HD XGA/HD Line Transmitter – DA
5
Figure 1: TP-112HD XGA/HD Line Transmitter – DA
Figure 2: TP-112HD (Top Side Panel)
Figure 3: TP-112HD (Lower Side Panel)
Table 1: TP-112HD XGA/HD Line Transmitter - DA Features
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2 LINE OUT 2 RJ-45 Connector Connects to
1
the LINE IN RJ-45 connector on the (second)
TP-120 XGA Line Receiver
2
3 LINE OUT 1 RJ-45 Connector Connects to
1
the LINE IN RJ-45 connector on the (first) TP-120
XGA Line Receiver
2
4 XGA/HD INPUT 15-pin HD
Connector
Connect to the XGA source
5 ON LED Illuminates when receiving power
Figure 4 and Table 2 define the TP-112HD underside panel:
1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at:
http://www.kramerelectronics.com
. Also, see the example illustrated in Figure 5