Kramer TP-580CT - Mounting TP-580 CT

Kramer Electronics Ltd.
TP-580CT – Mounting TP-580CT
5
Mounting TP-580CT
This section provides instructions for mounting TP-580CT. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount TP-580CT before connecting any cables or power.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
Mount TP-580CT in a rack:
• Use the recommended rack adapter
(see www.kramerav.com/product/TP-580CT).
Mount TP-580CT on a surface using one of the following methods:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to
a flat surface. For more information go to
www.kramerav.com/downloads/TP-580CT.