VM‑4HDT, VM‑3HDT, VM‑2HDT – Operating the VM‑4HDT, VM‑3HDT and VM‑2HDT
In the same way, if RS-232 is also connected to the displays on TP-580R (1) and
TP-580R (2) (not shown in Figure 9) they can also receive specific control commands each,
which will be ignored by devices of a different model.
Figure 9: IR/RS-232 Routing Example
EDID Configuration
This section describes the following functions:
• Acquiring an EDID on page 12.
• Acquiring a Custom EDID on page 12.
• Forcing the RGB Mode on page 13.
To Next Page
Loading...
