3 Overview
The Kramer VP-419xl Video To SXGA/HD Scaler is a high quality converter for up-
scaling composite video, s-Video (YC), and SD component video to XGA and HD
resolutions. It also has a computer graphics (XGA) input, which, when selected, is
routed directly (bypassed) to the output. Video inputs are de-interlaced and scaled
to the selected PC or HDTV resolutions, as follows:
The terminology XGA is used throughout this manual, where this implies any RGBHV signal
on a 15-pin HD connector having a resolution from VGA up to SXGA.
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WXGA+, WSXGA+
HDTV: 480p, 576p, 720p50, 720p60, 1080i50, 1080i60, 1080p50, 1080p60
The VP-419xl Video to SXGA/HD Scaler also features:
Automatic detection of NTSC, N4.43, PAL, PAL-M, PAL-N, SECAM video
standards
An On-Screen Display (OSD) for easy setup and adjustment, accessible via
the IR remote control and via the front-panel buttons
A high-performance adaptive 3D comb filter (for precise color management)
Per-pixel motion compensated de-interlacing for artifact-free video images
Automatic detection for 3:2 pulldown for 24fps film source material
Frame rate conversion of 50Hz to 60Hz for PAL input signals
A Vertical Temporal (VT) Filter for removing jagged artifacts
Advanced color/luminance transient improvement circuitry
A PC Input connector for easy integration into an existing system
A built-in procamp for convenient signal adjustment
A non-volatile memory that retains the last settings used
The machine is fed from an external 12V DC source, making it suitable for field
operation.
To Next Page
Loading...
Need help?
General
