Kramer VP-427 - Page 14

VP-427 - Operating the VP-427
11
Main Menu
Submenu
Values
Notes
Advanced
Auto Sync Off
On
Off
Turns ON/OFF the auto sync. When
ON, after a short period of not
detecting a valid video signal on the
input(s), the unit disables the two
outputs until a valid input is again
detected or any keypad is pressed
HDCP on
Input
On
Off
Selects the HDCP option for the HDMI
input: either ON (the default) or OFF.
Setting HDCP support on the HDMI
input to disable (OFF) allows the
source to transmit a non-HDCP signal
if required (for example, when working
with a Mac computer)
Freeze
Freeze+Mute
Mute Only
Freeze Only
Exit
Select to freeze/mute the display
Factory Default
No
Yes
Reset the unit to its Factory Default
settings
Info Menu
Source Info
Displays the source, input and output
resolutions and the software version
(read only)
Sync Info
Firmware
Version
Exit
Select to exit OSD