Step 2: Install the VP-440
Step 3: Connect inputs and outputs
Mount the machine in a rack or place on a table.
VP-440 Quick Start (P/N: 2900-300476QS REV 1)
1 Quick start guide
4 Rubber feet
The VP-440 Presentation Switcher/Scaler
1 Power adapter
Mounting brackets
For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to
the VP-440.
VP-440 Quick Start Guide
Step 1: Check what’s in the box
Rev:
Microphone
Always switch OFF the power on each device
before connecting it to your VP-440.
Rev:
Computer
Graphics
Source (PC)
BluRay Disk
Player
Laptop LCD
Display
Projector
Analog Audio
Inputs
Analog Audio
Inputs
PC Control
Device
RJ-45 Pinout
For the Ethernet connector, see the proper wiring diagram below:
For a condenser
microphone:
For a dynamic
microphone:
1
2
3
4
5
6
7
8
Orange / White
Orange
Green / White
Blue
Blue / White
Green
Brown / White
Brown
PIN
Wire Color
EIA / TIA 568B
The Microphone Pinout:
Microphone +
Microphone -
Ground
Microphone
Ground
For optimum range and performance use
Kramer's BC-HDKat6a
cable. These specially built cables significantly outperform
regular CAT 6 cables.
This guide helps you install and use your product for the first time. For more detailed information, g
to to download the latest manual or scan the QR code on
the left.
o
http://www.kramerav.com/manual/VP-440
To Next Page
Need help?
General
