Need help?Do you have a question about the Kramer VP-728 and is the answer not in the manual?
General| HDCP Compliant | Yes |
|---|---|
| 3D Support | Yes |
| Control | RS-232, Ethernet, IR |
| Audio | Stereo |
| Video Standards | HDMI |
| Power Supply | 100-240V AC |
| Weight | 3.2kg (7 lbs) approx. |
| Type | Presentation Switcher/Scaler |
Guidance on unpacking, reviewing the manual, and using high-resolution cables.
Summarizes the basic setup and operation steps for the VP-728.
Explains the High-Definition Multimedia Interface (HDMI) and its relevance to the VP-728.
Offers advice on using quality cables and positioning the unit for optimal performance.
Explains how to connect a PC to the VP-728 via RS-232 for control.
Explains how to use the INPUT SELECTOR buttons to switch between sources.
Details the Picture-in-Picture (PIP) functionality and its display options.
Describes methods to activate the Picture-in-Picture feature.
Explains how to select the source for the Picture-in-Picture display.
Explains how to swap the PIP source with the main display using the remote.
Describes a quick method to select the PIP source using front panel buttons.
Details how to lock and unlock the front panel buttons to prevent accidental changes.
Describes the infrared remote control transmitter and its capabilities.
Details the Input screen settings for selecting and configuring input sources.
Explains how to load and display JPEG files using the USB input.
Describes the Picture screen settings for adjusting brightness, contrast, color, and sharpness.
Details the Output screen settings for resolution, aspect ratio, and scaling.
Explains the settings for the Picture-in-Picture (PIP) feature, including type, source, and size.
Describes the Audio screen settings for adjusting input/output volume, bass, treble, and balance.
Details the Geometry screen settings for keystone, rotation, and projection adjustments.
Covers general setup options like saving profiles, slideshow, frame lock, and factory reset.
Explains how to prepare and run a slideshow using the USB input.
Introduces the Advanced Setup screen for further customization.
Instructions for downloading the necessary firmware files from the Kramer website.
Steps for connecting the PC to the VP-728's terminal block for firmware upgrade.
Step-by-step guide for performing the audio firmware upgrade using the provided software.
Covers serial configuration, command formats, and communication confirmations.
Lists and explains common error codes encountered with the VP-728.
To Next Page
