7 Presentation Switcher / Scaler Buttons
The VP-728 includes the following front panel buttons:
• Nine INPUT selector buttons, see section
7.1
• A PIP button, see section
7.2
• BLANK and FREEZE buttons
• Six OSD buttons
• A RESET TO XGA/720p button
• A PANEL LOCK button, see section
7.3
7.1 Switching an Input
Each INPUT SELECTOR button can be used to select the source.
You can switch seamlessly
1
7.2 The PIP Button Feature
between each input that is connected to a source,
by pressing the appropriate INPUT SELECTOR button.
The Picture-in-Picture inserter (PIP) uses K-IIT XL™ image insertion
technology to present video and graphic sources simultaneously
2
• An inserted video source
. You can
display:
3
PIP over a graphic source
4
• An inserted graphic source
4
PIP over a video source
3
Three types of PIP insertions are available:
• Picture-in-Picture – the PIP image appears over the background image
• Picture + Picture – both the video source and the graphic source are placed side
by side and have the same height (the PIP image is stretched lengthwise)
• Split – both the video source and the graphic source are placed side by side (the
PIP image appears smaller than the defined size and the source size is reduced)
1 FTB™ switching for glitchless transitions between inputs
2 If the HDMI signal is HDCP protected, it cannot appear on a display that is not HDCP compliant, and the machine will not
output a picture on the VGA output
3 That is, composite, s-Video
4 That is, HDMI or UXGA or component
To Next Page
Loading...
