Kramer VP-728

Configuring the VP-728 via the OSD MENU Screens
21
21
8.1 The Input Screen
Figure 9 and Table 5 define the Input screen.
Figure 9: Input Screen
Table 5: Input Screen Functions
1
Setting
Function
Selection
Default
Source
2
Select the source
3
Input 1, Input 2, Input 3, Input 4, VGA 1, VGA 2,
HDMI 1, HDMI 2 or USB
Input (1 to 4)
Source Type
Select the source type Component, YC or video (CV) Video
Image Name
4
Select the file name
5
of the image displayed when the USB port is selected as an
input
Color Format Select the color format Auto, RGB or YUV Auto
Video Standard Select the video standard Auto, NTSC, PAL, PAL-M, PAL-N, NTSC 4.43,
SECAM or PAL-60
Auto
H-Position Set the horizontal position
6
Set according to the input resolution
V-Position Set the vertical position Set according to the input resolution
Frequency Adjust the frequency
7
0 to 50 0
Phase Adjust the phase 0 to 31 0
Auto image Assesses the image and improves the quality accordingly, by automatically
adjusting the phase, frequency and position
1 Values may change according to the firmware version (you can download the up-to-date firmware version from our Web
site at http://www.kramerelectronics.com
)
2 When switching sources, the image fades through black
3 Automatically updated when pressing an input front panel button on the machine
4 Available when the slideshow feature is Off (see section
8.7)
5 Supports JPEG format only. The JPEG file should not exceed a resolution of 2048x1536. If the image file is not within the
definition, the machine displays the message: “Size Too Big”
6 For UXGA and component video inputs
7 For UXGA inputs