Kramer VP-728

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-728 via the OSD MENU Screens
28
8.7 The Setup Screen
Figure 15 and Table 10 define the Setup screen.
Figure 15: Setup Screen
Table 12: Setup Screen Functions
Setting
Function
Selection/Range
Default
Save Save a profile From Profile 1 to Profile 8
Recall Recall a profile From Profile 1 to Profile 8
Slideshow Set speed for slide show (see section 8.7.1) Min, Low, Mid, Long, Max, Off Min
Frame Lock Locks the vertical refresh rate of the output to
that of the input
1,2
On/Off Off
Auto Image Automatically adjust and align the picture
each time of the UXGA inputs is selected or if
the UXGA input resolution has changed
Manual, Auto Manual
Switching Mode Select seamless switching (fade-through-
Black) or Fast switching which is faster but
may cause glitches on the output (applies
when switching between analog inputs)
Seamless, Fast Seamless
Factory Reset
Reset your VP-728 to its preset default
settings
Yes/No
Advanced Setup: Open the advanced setups (see Figure 16) Mode Set (see Table 13)
OSD (see
Table 14)
Misc (see
Table 15)
Input (see
Table 16)
Output (see
Table 17)
1 Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame
synchronized
2 In cases where the output resolution can support the vertical refresh rate of the input, the output refresh rate will change
according to the input refresh rate