Do you have a question about the Kramer VP-440 and is the answer not in the manual?
Control via front panel, OSD, web pages, and RS-232 commands.
Entering, navigating, and overview of OUTPUT and PICTURE menus.
Direct connection to PC or via network hub/switch/router.
Steps to connect VP-440 to a PC and configure network settings.
Supported browsers, OS, and overview of web page features.
Steps to access and browse the controller application.
Configuring HDCP, Audio Source, and Volume for each input.
Configuring DHCP or static IP settings for network connectivity.
Steps to upload new firmware to the VP-440 device.
Selecting output resolution, size, and picture quality for HDBT and HDMI.
Enabling/disabling HDCP for inputs and outputs.
Configuring RS-232 baud rate, data bits, parity, and stop bits.
Setting up commands to control external devices.
Setting user name and password for web access.
How to log in to secured web pages with credentials.
Steps to disable web page security.