Need help?Do you have a question about the Kramer VS-411XS and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Number of Inputs | 4 |
| Number of Outputs | 1 |
| Max Resolution | 4K@60Hz (4:4:4) |
| HDMI Version | 2.0 |
| Max. Data Rate | 18 Gbps |
| HDCP Compliance | 2.2 |
| Audio Embedding | Yes |
| Power Supply | 5V DC |
| Type | HDMI |
| Audio Support | HDMI |
| Control | RS-232, IR |
| Bandwidth | 18 Gbps |
| Weight | 0.8 kg |
Description of front panel features, buttons, and LEDs for VS-211XS and VS-411XS.
Description of rear panel connectors and their functions for VS-211XS and VS-411XS.
Explanation of manual, auto-last-connected, and auto-priority switching modes.
How the built-in control gateway sends CEC commands via LAN for device control.
Overview of Maestro's capabilities for configuring triggers and automation scenarios.
Using Kramer Aware touch panels for room control with the VS-411XS.
Methods for acquiring and discovering the device's IP address via Ethernet or reset.
Connecting and operating the VS-411XS via Ethernet using a PC or network hub.
Configuring IP settings, including enabling or disabling DHCP.
Instructions for upgrading the device's firmware using the web interface.
Activating device security and defining logon authentication details for web access.
Detailed list and syntax of commands supported by the VS-411XS.
To Next Page
