To sync device time and date to a server:
1. In the Navigation pane, click Device Settings.
2. Select the Time & Date tab. The Time & Date tab appears (Figure 25).
3. Next to Use Time Server (NTP), click YES to use time server (NTP).
Device Time & Date Fields are disabled, and network fields are enabled.
4. Type in server information:
▪ Enter the address.
▪ Set sync schedule.
5. Click Save Changes.
The devices date and time are synchronized to the server address entered.
Upgrading the Firmware
As features are added, new firmware versions are released for downloading on the Kramer
website.
To upgrade the firmware:
1. In the Navigation pane, click Device Settings.
2. Select the FW Upgrade tab. The FW Upgrade tab appears.
Figure 26: Device Settings Page – Firmware Upgrade tab
3. Click Update. The Windows Browser opens.
4. Browse to the required file and click Open. The firmware file name is displayed in the
Firmware Upgrade tab.
To Next Page
Loading...
