Kramer VS-411XS - Security Settings

Kramer Electronics Ltd.
VS-211XS, VS-411XS – Using Embedded Web Pages
32
5. Click Start Upgrade. The firmware file is loaded, and a progress bar is displayed.
Do not interrupt the process or the VS-411XS may be damaged.
6. When the process is complete reboot the device.
The firmware is upgraded.
You can upgrade firmware for multiple VS-411XS devices installed in the organization via
Kramer Network.
Setting Security
The Security tab enables activating device security and defining logon authentication details.
When device security is enabled, web page access requires authentication upon initial landing
on operation page. The default password is Admin. The upper right corner of the webpage
displays or indicating whether authentication is required. By default, security is enabled.
To disable security:
1. In the Navigation pane, click Device Settings.
2. Select Security tab. The Security tab appears.
Figure 27: Device Settings – Security Enabled
3. Click Disabled. A Confirmation message appears.
Figure 28: Security Tab – Confirmation Message