Kramer VS-411XS - Remote Buttons Setup; Loading and Saving Settings

Kramer Electronics Ltd.
VS-211XS, VS-411XS – Using Embedded Web Pages
25
2. Next to Unit Name, enter the device name and click Set.
3. View model name, firmware version and serial number.
General settings are viewed/set.
Setting Remote Buttons
You can define the function of the REMOTE contact closure pins (see Using Contact Closure
Remote Control Pins on page 16).
To define the REMOTE contact closure buttons:
1. Click Device Settings on the Navigation List.
The General tab in the Device Settings page appears (Figure 19).
2. Next to Remote Buttons, define button functionality.
▪ Preset – Maintains PINs default functionality.
▪ Custom – All PINs act as GPI/O inputs and are configured via Maestro
(see Configuring Device Control and Automation on page 41).
For VS-211XS, CST-1 and CST-2 are GPI/O inputs by default.
REMOTE PIN functionality is defined.
Loading and Saving Settings
VS-411XS enables saving the current configuration settings (such as all the Maestro settings,
auto-switching settings, audio level and audio settings, and so on) for easy configuration
duplication on similar systems or recall in the future.
Saving Configurations
To save a configuration:
1. Click Device Settings on the Navigation List.
The General tab in the Device Settings page appears (Figure 19).
2. Click Save.
The device saves the configuration and then the Download File message appears.
Figure 20: General Settings – Download File Message