• Setting Video Signal Timeouts on page 37.
• Managing EDID on page 38.
• Configuring Device Control and Automation on page 41.
• Viewing About Page on page 59.
To use the browser:
1. Open your Internet browser.
2. Type the IP number of the device, or its hostname, in the Address bar of your browser.
For example, the default fallback IP address or default host name (see Discovering IP
Address via Ethernet on page 17):
The device operation page appears.
Figure 18: Operation Page with Navigation List on Left
3. Click the tabs on the left side of the screen to access the relevant web page.
Selecting an Input
You can manually select an input. Manual selection via the front panel buttons or the
embedded webpage overrides the auto-switching mode.
To select an input:
1. Click Operation on the Navigation List.
The Operation page appears (Figure 18).
2. Click an IN button.
The input is selected and the button on the front panel is lit.
To Next Page
Loading...
