Blank
Toggles between a blank screen (blue or black
screen) and the display
POWER Cycles power
Main Source 9 separate keys for selecting each of the
following sources: Input 1, Input 2, Input 3, Input
4, VGA 1, VGA2, HDMI 1, HDMI 2 and USB
Reset Press and hold to reset to the default resolution
2
Info
Press to toggle the Info OSD menu
Capture Capture an image to place as a logo or
background (see
Table 15)
MENU Shows the main OSD Menu
Navigation arrows Allows maneuvering within an OSD screen (left,
right, up and down, as well as the ENTER arrow
at the center)
The + and - buttons increase and decrease the
volume level, respectively (when not in the OSD
menu)
Auto Image Assesses the image and improves the quality
accordingly, by automatically adjusting the
phase, frequency and position
Save Saves a profile
Recall Recalls a profile
Picture Shows the Picture OSD menu
PIP source Nine separate keys for selecting each of the
following PIP sources: Input 1, Input 2, Input 3,
Input 4, VGA 1, VGA2, HDMI 1 and HDMI 2
Mute Mutes the audio signal
Swap Toggles between the PIP content and the parent
screen content
PIP Selects the picture-in-picture function and
illuminates the PIP button
3
1 Can be programmed to mute the audio signal at the same time (see Table 15)
2 Toggles between reset to XGA and reset to 720p
3 See section
7.2
To Next Page
Loading...
