Kramer VP-728 - The Audio Screen

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-728 via the OSD MENU Screens
26
8.5 The Audio Screen
Figure 13 and Table 9 define the Audio screen.
Figure 13: Audio Screen
Table 9: Audio Screen Functions
1
Setting
Function
Selection/Range
Default
Type Select the audio input type
2
Analog or S/PDIF Analog
Input Volume Adjust the input volume -22 to 22 0
Output Volume Adjust the output volume -100 to 24 0
Bass Adjust the bass -36 to 36 0
Treble Adjust the treble -36 to 36 0
Balance Adjust the balance -10 to 10 0
Loudness Set the loudness On/Off Off
Delay Define the delay type Dynamic or User Define Dynamic
3
User Delay Available when selecting the User
Defined delay
0 to 340
4
0 (msec)
USB Select the audio signal to follow the
USB signal
No Audio, Input 1, Input
2, Input 3, Input 4, VGA
1, VGA 2, HDMI 1 or
HDMI 2
No Audio
1 Values may change according to the firmware version (you can download the up-to-date firmware version from our Web
site at http://www.kramerelectronics.com
)
2 Available for IN 1 to IN 4
3 Dynamic means that the audio delay is equal to the pipeline video delay
4 In 2msec steps