Configuring the VP-728 via the OSD MENU Screens
Setting Function Selection/Range Default
Custom
Zoom
Set the Zoom From 100% to 400%
Zoom H-Pan 0 to 31 16
Zoom V-Pan 0 to 31 16
8.4 The PIP Screen
Figure 12 and Table 8 define the PIP screen.
Figure 12: PIP Screen
Table 8: PIP Screen Functions
1
On/Off Activate/deactivate the PIP
feature
2
On/Off
Off
Type Select the PIP type Picture-In-Picture,
Picture + Picture
3
Picture-In-
Picture or Split
Source Select the PIP source
4
See Table 3
PIP Size Select the PIP size
1/25, 1/16, 1/9, 1/4, or Custom 1/4
H-Position Set the horizontal position of the
PIP on the display
0 – 128 3
V-Position Set the vertical position of the PIP
on the display
0 – 128 0
H-Size Set custom size
V-Size Set custom size
6
1 – 256
Frame Turn the PIP frame on or off On/Off On
Frame Color Select the color of the PIP frame Red, Green or Blue Blue
1 Values may change according to the firmware version (you can download the up-to-date firmware version from our Web
site at http://www.kramerelectronics.com
)
2 For a USB source with the PIP enabled, the maximum output image size is 960 horizontal pixels
3 Maintains the aspect ratio
4 When changing the PIP source, the display fades through black
5 The PIP size can be set up to the full height and up to half the width of the screen
6 The actual range depends upon the input resolution
To Next Page
Loading...
