Kramer VP-728

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Presentation Switcher / Scaler
8
Table 1: Front Panel Presentation Switcher / Scaler Features
#
Feature
Function
1 POWER Switch Illuminated switch for turning the machine ON or OFF
2 IR Receiver / LED Red when the unit accepts IR remote commands
3 UNIVERSAL INPUT Selector
Buttons
Press to select the composite video / s-Video / component video
source
1
4
(from 1 to 4)
INPUT Selector
Buttons
2
UXGA 1 Press to select the UXGA
1
source 1
5 UXGA 2 Press to select the UXGA
1
source 2
6 HDMI 1 Press to select the HDMI source 1
7 HDMI 2 Press to select the HDMI source 2
8 USB Press to select the USB
3
8.7.1
source and also run/stop the slideshow (see
section )
9 PIP Button Toggles the picture-in-picture function (see section 7.2)
10 BLANK Button Press to toggle between a blank screen (blue or black screen)
4
11
and the
display
FREEZE Button Press to freeze/unfreeze the output video image
4
, as well as pause the
slideshow (see section
8.7.1)
12 MENU Button Displays the OSD menu screen (toggle)
13 ENTER Button Moves to the next level in the OSD screen, or accepts a new parameter
14
Button
Decreases the range by one step in the OSD screen or moves to the
previous level in the OSD screen
Decreases the volume level, when not in the OSD menu
15
Button
Moves up one step (in the same level) in the OSD screen, or moves to
the previous slide when running a slideshow (see section
8.7.1)
16
Button
Increases the range by one step in the OSD screen
Increases the volume level, when not in the OSD menu
17
Button
Moves down one step (in the same level) in the OSD screen, or moves
to the next slide when running a slideshow (see section
8.7.1)
18 RESET TO XGA/720p Button Press and hold to reset to the default resolution
5
19 PANEL LOCK Button Press to lock/unlock the front panel to prevent unintentional operation
20 USB Connector Connect to a USB drive to read JPEG files, and also to download new
firmware
1 And the appropriate audio source
2 When selected, button illuminates. See section
7.1 for details of how to program the INPUT SELECTOR buttons
3 JPEG files on a USB memory stick
4 Can be programmed to mute the audio signal at the same time (see
Table 15)
5 Toggles between reset to XGA and reset to 720p