Kramer VP-728

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-728 via the OSD MENU Screens
20
8 Configuring the VP-728 via the OSD MENU Screens
The OSD superimposes a menu on the screen from which you can configure
and control each input signal on your VP-728, using the MENU, ENTER,
,
, and OSD buttons on the front panel and the remote transmitter.
To use the OSD menus:
1. Select the desired input signal.
2. Use the menu buttons as follows:
 Press the MENU front panel OSD button or the MENU key on the
infrared remote control transmitter (see
Figure 7) to display the main
MENU screen
1
Figure 8, which displays eight interactive icons (see )
 Press the MENU front panel OSD button or the MENU key on the
infrared remote control transmitter to move to the previous level in the
OSD screen (Esc)
 Press the
or buttons to select menu icons and then press ENTER
 Press the
or buttons to select the item to be set or adjusted and then
press ENTER
 Press the
or buttons to set the item and then press ENTER, or
 Press the
or buttons to increase or decrease the (numerical) rate
respectively
Figure 8: MENU Items
1 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2), Level 4 (a subset of level 3) and a numerical range