Kramer VP-728

Presentation Switcher / Scaler Buttons
15
15
7.2.1 Activating the PIP Feature
You can activate the PIP by:
• Pressing the PIP button
• Pressing the PIP key on the infrared remote control transmitter (see
section
7.4, Figure 7)
• Switching on the PIP functionality via the OSD Menu (see
Figure 12 and
Table 8)
7.2.2 Selecting the PIP Source
To use the PIP feature, set the PIP source via the OSD menu (see Figure 12 and
Table 8) or the remote-transmitter keys.
To set the PIP source via the OSD menu, do the following:
1. Press the MENU button to enter the OSD menu.
2. Press the
button to move to the PIP icon.
3. Scroll down to select Source and press ENTER.
4. Use the
or buttons to select the PIP Source from the drop-down list
box, and press ENTER (see
Figure 12).
5. To exit the OSD menu, press the MENU button.
Figure 5: PIP Source Over Background