Kramer VP-728

Configuring the VP-728 via the OSD MENU Screens
23
23
8.2 The Picture Screen
The Brightness, Contrast, Color and Hue picture settings are saved
individually for each input (except USB).
Figure 10 and Table 6 define the
Picture screen.
Figure 10: Picture Screen
Table 6: Picture Screen Functions
1
Setting
Function
Selection/Range
Default
Brightness Adjust the brightness 0 to 100 50
Contrast Adjust the contrast 0 to 100 50
Color Adjust the color 0 to 100 55
Hue Adjust the hue 0 to 360 180
Sharpness Adjust the sharpness 0 to 100 50
Output Gamma Adjust the gamma Gamma 1 to Gamma 5 Gamma 1
Film Mode Set the film mode Auto, Video, Film Auto
Temporal NR Set the temporal noise
reduction level
Off, Low, Medium, High High
Mosquito NR Set the Mosquito noise
reduction level
Off, Low, Medium, High Low
Block NR Set the block noise
reduction level
Off, On Off
Detail Enhancement Set the detail
enhancement
Off, Low, Medium, High Medium
2
Luma Transition Enhance Set the luminance
transition enhance level
Off, Low, High Low
Chroma Transition Enhance Set the chrominance
transition enhance level
Off, Low, High Low
1 Values may change according to the firmware version (you can download the up-to-date firmware version from our Web
site at http://www.kramerelectronics.com
)
2 If the USB input is selected, Detail Enhancement is set to Off