Kramer VP-734 Quick Start Guide

VP-734 Quick Start
P/N:
2900- 3
01068QS
Rev:
6
Scan for full manual
VP-734 Quick Start Guide
This guide helps you install and use your VP-734 for the first time.
Go to www.kramerav.com/downloads/VP-734
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VP-734 Presentation Switcher/Scaler
1 Set of rack ears
4 Rubber feet
Remote control transmitter with batteries
1 Power cord
1 Quick start guide
2 C-GM/3RVF-1 cables
Step 2: Get to know your VP-734
# Feature Function
1
IR Sensor
Receives signals from the remote control transmitter.
IR LED
Lights red when the unit accepts IR remote commands.
2
INPUT Selector
Buttons
(illuminate green
when selected)
UNIV. 1
Press to select the analog video (VGA / component / composite / s-Video) source
(configured via the OSD menu), and the appropriate audio source (from 1 to 2).
3
HDMI™ 1
Press to select the HDMI source (from 1 to 4).
4
DP
Press to select the DP source.
5 Program BLANK Button Press to toggle between a blank screen (blue or black) and the program display.
The BLANK button can be programmed to mute the audio signal at the same time.
6
Program FREEZE Button
Press to freeze/unfreeze the program output video image. The FREEZE button can be
programmed to mute the audio signal at the same time.
7
MENU Button
Press to display the OSD menu screen. Press again to return to normal operation.
8
ENTER Button
Press to move to the next level in the OSD screen or to accept a new parameter.
Button Decreases the range by one step in the OSD screen or moves to the previous level in
the OSD screen.
Decreases the volume level, when not in the OSD menu.
Button
Moves up one step (in the same level) in the OSD screen or moves to the previous slide
when running a slideshow.
Button
Increases the range by one step in the OSD screen.
Increases the volume level, when not in the OSD menu.
Button
Moves down one step (in the same level) in the OSD screen or moves to the next slide
when running a slideshow.
9
RESET TO XGA/720p Button
Press and hold to reset to the default resolution (toggles between RESET TO XGA and
720p).
10
PANEL LOCK Button
Press to lock/unlock the front panel to prevent unintentional operation
11
USB Connector
Connects to a USB drive to download a Logo and save settings.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Kramer VP-734 Specifications

General

Brand	Kramer
Model	VP-734
Category	Switch
Language	English