Kramer VP-734 Quick Start Guide

# Feature Function
12
UNIV 1 IN 15-pin HD Connector
Connect to the universal source (as computer graphics, composite video,
s-Video or component video), from 1 to 2.
13
HDMI 1 IN Connector
Connect to the HDMI 1 source (from 1 to 4).
14
DP IN DisplayPort Connector
Connect to the DP source.
15
CONFIGURABLE AUDIO INPUTS on 3.5
Mini Jack Connectors
Connect to the unbalanced stereo analog audio sources from 1 to 7.
16
AUDIO LINE OUT 5-pin Terminal Block
Connect to the balanced stereo analog audio acceptor.
17
VIDEO
OUTPUTS
HDMI 1 Connector
Connect to an HDMI acceptor.
18
PC 15-pin HD Connector
Connect to a computer graphics acceptor.
19
ETHERNET Port
Connect to your LAN.
20
RS-232 9-pin D-sub Connector
Connect to PC or Serial Controller.
21
SPKR OUT 4-pin Terminal Block
Connect to a pair of loudspeakers.
22
S/PDIF IN 3.5 Mini Jack Connector
Connect to a digital audio source.
23
S/PDIF OUT 3.5 Mini Jack Connector
Connect to a digital audio acceptor.
24
Mains Power Connector
Connect to the mains power.
25
Mains Power Fuse
Fuse for protecting the device.
Step 3: Install the VP-734
To rack mount the machine attach both ear brackets (by removing the screws from each side
of the machine and replacing those screws through the ear brackets) or place the machine
on a table.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VP-734. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the VP-734.

Kramer VP-734 Specifications

General

Brand	Kramer
Model	VP-734
Category	Switch
Language	English