Setting up – Location
Neither set up or operate the machine in rooms where
there is a risk of fire or explosion nor put it into puddles.
Do not use the machine under water.
Putting into operation
2.
Check water inlet filter for cleanli-
ness prior to putting the machine
into operation!
Manually unscrew hose attachment.
Take out the serial water inlet filter
using needle nose pliers and clean if
filter is soiled.
1.
Move high-pressure cleaner to the job
site. The Kränzle 1132 is a movable
machine with sturdy trolleys ideally sui-
ted for difficult terrain and stairs.
3
. Each time check oil level at oil-level
glass prior to putting HP cleaner
into operation. (Take care that
cleaner is in horizontal position!)
The oil level must be visible in the oil-
level glass.
14
To Next Page
Loading...
Need help?
General
