15
Putting into operation
When carrying the high pressure cleaner, make sure to bear in mind the
weight of the machine, see technical data.
Neither set up or operate the K 1050 TS T in rooms where there is a risk of fire
or explosion nor put it into puddles. Do not use the machine under water.
If, none the less, the machine is operated in a hazardous area,
the applicable
safety regulations are to be observed.
1.
Use supplied screws to fasten the lower
cable retractor of the electric cable at
the place provided on the frame
.
3. Move high pressure cleaner to the
job site. The K 1050 TS T is a movable
machine with sturdy trolleys ideally
suited for dicult terrain and stairs.
2. Position machine. Place crank on the
hexagon and use supplied washer and
screw to fasten.
4.
Owing to its light weight and handy size,
the K 1050 TS T can be easily carried
by two persons.