18
Never touch plug or live parts with moist or wet hands.
Putting into operation
13. Switch on HP cleaner with opened
trigger gun (trigger pulled). Bleeding of
the machine: Pull and release trigger
of trigger gun with safety catch several
times. Start cleaning task.
14. When using the Dirtkiller make sure
that lance points downward when
starting
.
15. The K 1050 TS T units are equipped with
a support for the safety gun with lance
during breaks
16. Therefore operate high pressure
cleaner in horizontal position only.
It is imperative that safety instructions be observed during use
of the machine.
12. Connect to circuit.
K 1050 TS T
230 V
~
, 9.6 A, 50 Hz
The socket must be protected with a
16A fuse on the mains side.
To Next Page
Loading...
