Kranzle K 115 - Do-It-Yourself

19
The nozzle is blocked!
No water but the gauge shows full pressure !
- Do it yourself!
Rinse the hose
through first.
You should now have a
powerful stream of
water,
but if you
only get a few
drops from
the lance
remove the lance and clean
the nozzle.
Using the flat spray lance you
only have to clean the
front nozzle.
Straighten a paper
clip and clean the
nozzle.
Insert pointed object
into the hole and pull
the cap back!
Check visually whether the
nozzle is clean.
Now it works as well
as before.