12
4. The machine can be connected to a
pressurised water line with cold or
60 °C hot water(see page 2).
Ensure that the water supply is clean when
sucking from external sources. The hose
cross section must be at least 1/2” = 12.7
mm (free passage). Filter 1 must
always be clean.
Please make sure
that the filter is clean
before using your high
pressure cleaner.
CAUTION !
When running your high pressure cleaner with hot water of 60 °C
raised temperatures occur.
Do not touch the pump without safety gloves!
Water
5. Maximum induction
height 2.5 m
see technical
data on page 2
Preparation for use
To Next Page
Loading...
