5
The motor is protected from overload by a motor protection switch, which automati-
cally cuts out the motor in the event of overload. However should the switch trip
frequently, the cause of the malfunction should be located and rectified (see page
6).
Replacements and inspection work should only be performed by qualified
persons when the machine is disconnected from the power
supply, i.e. pull out the plug from the electrical socket.
Motor protection switch
Setting up
Location
Neither set up and operate the machine in rooms where there is a risk of
fire or explosion nor put it into puddles. Do not use the machine under
water.
Never use liquid containing solvents such as paint thinners, petrol, oil or
similar liquid matter. Pay attention to the instructions of the
manufacturers of the cleaning agents. The seals in the ma-
chine are not resistant to solvents. The spray of solvents is inflammable,
explosive and poisonous.
CAUTION !
CAUTION !
When running your high pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the machine without safety
gloves!
Description
To Next Page
Loading...
Need help?
General
