5
Step 1a: Installing the easy install assembly (Without escutcheon)
Shut o the water supply. Remove the old
faucet. Clean the mounting surface. Check
for the proper thickness of the sink.
Insert the base (a) into sink. If your model
does have a escutcheon, skip to step 1 b.
Step 1b: Installing the easy install assembly (With escutcheon)
Place the escutcheon (C) and the gasket (D)
on the sink. Insert the base (a) into
escutcheon (C). Note: “Front” on the base (a)
must face the front of the sink. The two
mounting plates (b) on the base (a) must be
loose and movable during the installation of
the base (a). If the sink is uneven, use silicone
under the gasket (D).
a
b
a
C
D
C
b
NOTE: “Front” on the base (a) must face the
front of the sink. The two mounting plates (b)
on the base (a) must be loose and movable
during the installation of the base (a).
To Next Page
Loading...
Need help?
General
