Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 0-3
Content
1 Introduction ...................................... 1 -1
1.1 DM4E, DM4 and DM4 DL ........................ 1 -2
1.2 Information about this manual .............. 1 -5
1.3 Layout and presentation
of this manual ......................................... 1 -6
1.4 Important remarks
about thickness testing ......................... 1 -7
Conditions for application of
ultrasonic thickness gauges ..................... 1 -7
Operator training ...................................... 1 -8
Limits of ultrasonic testing ........................ 1 -8
Ultrasonic thickness measurement........... 1 -9
Influence of the test material .................... 1 -9
1.5 Important notes on
thickness testing with the DM4 ........... 1 -11
Probe Zero Adjustment........................... 1 -11
Couplant rests ........................................ 1 -12
Measurement precision .......................... 1 -12
Probes.................................................... 1 -12
DM4 DL Data Logger ............................. 1 -13
2 Scope of supply and accessories... 2 -1
2.1 Scope of delivery .................................... 2 -3
2.2 Required accessories ............................. 2 -4
2.3 Recommended accessories ................... 2 -4
2.4 Recommended outside products ........... 2 -6
3 Preparation for operation ................ 3 -1
3.1 Battery supply ......................................... 3 -2
Inserting batteries ..................................... 3 -2
3.2 Connecting the probe ............................. 3 -4
4 Basics of operation .......................... 4 -1
4.1 Display..................................................... 4 -2
Display indications .................................... 4 -2
4.2 Keys ......................................................... 4 -4
4.3 Switching the instrument on and off ..... 4 -5
Indications after switching on.................... 4 -5
Dialog probes ............................................ 4 -5
Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 0-3
Content
1 Introduction ...................................... 1 -1
1.1 DM4E, DM4 and DM4 DL ........................ 1 -2
1.2 Information about this manual .............. 1 -5
1.3 Layout and presentation
of this manual ......................................... 1 -6
1.4 Important remarks
about thickness testing ......................... 1 -7
Conditions for application of
ultrasonic thickness gauges ..................... 1 -7
Operator training ...................................... 1 -8
Limits of ultrasonic testing ........................ 1 -8
Ultrasonic thickness measurement........... 1 -9
Influence of the test material .................... 1 -9
1.5 Important notes on
thickness testing with the DM4 ........... 1 -11
Probe Zero Adjustment........................... 1 -11
Couplant rests ........................................ 1 -12
Measurement precision .......................... 1 -12
Probes.................................................... 1 -12
DM4 DL Data Logger ............................. 1 -13
2 Scope of supply and accessories... 2 -1
2.1 Scope of delivery .................................... 2 -3
2.2 Required accessories ............................. 2 -4
2.3 Recommended accessories ................... 2 -4
2.4 Recommended outside products ........... 2 -6
3 Preparation for operation ................ 3 -1
3.1 Battery supply ......................................... 3 -2
Inserting batteries ..................................... 3 -2
3.2 Connecting the probe ............................. 3 -4
4 Basics of operation .......................... 4 -1
4.1 Display..................................................... 4 -2
Display indications .................................... 4 -2
4.2 Keys ......................................................... 4 -4
4.3 Switching the instrument on and off ..... 4 -5
Indications after switching on.................... 4 -5
Dialog probes ............................................ 4 -5
To Next Page
Need help?
General
