0-4 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Content
Non-dialog probes: DA3 mode
or AUTO mode ......................................... 4 -6
Switching the instrument off ..................... 4 -7
4.4 Automatic instrument switch-off........... 4 -7
4.5 Operation concept.................................. 4 -8
Selecting operation modes/functions ........ 4 -8
Changing settings/values ......................... 4 -8
4.6 Automatic probe zero adjustment......... 4 -9
4.7 Automatic probe recognition............... 4 -10
4.8 Handling the probe............................... 4 -10
5 Operation .......................................... 5 -1
5.1 Basic settings ......................................... 5 -2
Setting the display backlight ..................... 5 -2
Setting the units of measure
and resolution........................................... 5 -2
Setting the unit for sound velocity ............. 5 -3
5.2 Calibrating the instrument...................... 5 -4
Calibration with a known sound velocity .... 5 -5
1-point calibration...................................... 5 -6
2-point calibration...................................... 5 -7
5.3 Thickness measurement....................... 5 -10
Standard measurement: THK mode......... 5 -10
Minimum capture measurement:
MIN mode............................................... 5 -11
5.4 Additional functions
in the DM4 and DM4 DL ....................... 5 -13
Setting the sensitivity GAIN .................... 5 -13
Setting the alarm limits ........................... 5 -14
Switching the alarm off again ................. 5 -15
Difference mode: DIF.............................. 5 -15
Setting the bandpass filter:FLTR ............ 5 -16
Measuring through coatings:
operating mode DUAL MULTI ................. 5 -17
5.5 Activating and deactivating functions 5 -19
0-4 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Content
Non-dialog probes: DA3 mode
or AUTO mode ......................................... 4 -6
Switching the instrument off ..................... 4 -7
4.4 Automatic instrument switch-off........... 4 -7
4.5 Operation concept.................................. 4 -8
Selecting operation modes/functions ........ 4 -8
Changing settings/values ......................... 4 -8
4.6 Automatic probe zero adjustment......... 4 -9
4.7 Automatic probe recognition............... 4 -10
4.8 Handling the probe............................... 4 -10
5 Operation .......................................... 5 -1
5.1 Basic settings ......................................... 5 -2
Setting the display backlight ..................... 5 -2
Setting the units of measure
and resolution........................................... 5 -2
Setting the unit for sound velocity ............. 5 -3
5.2 Calibrating the instrument...................... 5 -4
Calibration with a known sound velocity .... 5 -5
1-point calibration...................................... 5 -6
2-point calibration...................................... 5 -7
5.3 Thickness measurement....................... 5 -10
Standard measurement: THK mode......... 5 -10
Minimum capture measurement:
MIN mode............................................... 5 -11
5.4 Additional functions
in the DM4 and DM4 DL ....................... 5 -13
Setting the sensitivity GAIN .................... 5 -13
Setting the alarm limits ........................... 5 -14
Switching the alarm off again ................. 5 -15
Difference mode: DIF.............................. 5 -15
Setting the bandpass filter:FLTR ............ 5 -16
Measuring through coatings:
operating mode DUAL MULTI ................. 5 -17
5.5 Activating and deactivating functions 5 -19