To Next PageTo Next Page
Need help?Do you have a question about the Kreg KMA4100 and is the answer not in the manual?
General| Product Type | Pocket Hole Jig |
|---|---|
| Model | KMA4100 |
| Color | Blue |
| Category | Power Tool Accessories |
| Drill Bit Size | 3/8 inch |
| Manufacturer | Kreg Tool Company |
| Weight | 1.2 lbs |
| Type | Pocket Hole |
| For Use With | Wood |
| Material Thickness Compatibility | 1/2 inch to 1-1/2 inch |
| Material | Plastic and Metal |
| Screw Size Compatibility | #6, #7, #8, #9, #10 screws |
Attaches the left and right support wings to the cutting base using screws.
Secures the front blade guard actuator and back board to the station.
Installs fixed and adjustable guide rails for saw blade alignment.
Connects adjustable guide rail brackets to the front and back boards.
Slides the adjustable fence and material hold-down clamps into place.
Guides the user on making an initial scoring cut on the cutting base.
Explains how to perform a standard 90-degree cut on a workpiece.
Details the process of setting up and making angled cuts with the station.
Provides instructions for supporting and cutting longer boards.
