To Next PageTo Next Page
Need help?Do you have a question about the Kreg Precision KMS7101 and is the answer not in the manual?
General| Model | KMS7101 |
|---|---|
| Brand | Kreg |
| Material | Aluminum |
| Accuracy | High precision |
| Adjustment | Micro-adjustable |
Critical warnings for safe operation of woodworking machines.
Advice on how to avoid dangerous kickbacks during cutting.
Details Kreg's product warranty and conditions for coverage.
Rules for safe tool usage, grounding, and work area environment.
Recommendations for appropriate apparel and footwear for user safety.
Lists and identifies all parts of the Precision Miter Gauge.
Lists and identifies parts for the Miter Gauge Add-On System.
Instructions for installing the T-slot washer for the miter slot.
Steps to adjust the guide bar for a snug fit in the miter slot.
Guide on attaching the auxiliary fence to the miter gauge.
Steps to apply the measuring scale to the auxiliary fence.
Instructions for assembling the positioning stop for repeat cuts.
Procedure for setting the cursor for accurate measurements.
Adjusting the cursor for precise length measurements.
Explains the role of the positioning stop for zero point recall.
How to use pre-drilled holes for common angles.
Explanation of degree and vernier scales for angle setting.
Detailed steps for setting angles using the main scale.
How to achieve 1/10th degree precision with the Vernier scale.
Procedure to reset and align the Vernier scale using shims.
Evaluating the necessity of micro-adjust for specific projects.
Explanation of the mechanism for fine angle adjustments.
Explains the design considerations for the micro-adjust mechanism.
Steps to set micro-adjust using feeler gauges.
Steps to set micro-adjust using a dial caliper.
Description of the Solid Production Stop accessory.
Details on the "Perfect Miter" attachment.
Information on the Top Trak measuring system.
Overview of the complete Precision Miter Gauge System.
