UNPACKING AND ASSEMBLY
1. After opening the box and removing the top layer of foam, the KRC-3 and the
following items will now be visible:
1 KRC-3 remote control
1 T- 10 Torx wrench
1 AC power cord
1 Owner’s Reference
1 Warranty card
NOTE: If any of these items are not included please contact your authorized
dealer immediately for assistance.
NOTE: Save all packing materials. If you must ship your KRC-3 in the future,
repack the unit in its original packing to prevent damage in transit.
BASIC INSTALLATION
\
1. Place the unit on a firm level surface free from excessive dirt or moisture.
The KRC-3 is not particularly hum sensitive, therefore other components can
be placed on or around the KRC-3.
NOTE: While the KRC-3 has a superb power supply and does not require a
dedicated circuit, we strongly advise against any connections through extension
cords or multiple AC adapters. High quality 15 amp line conditioners or
grounded AC strips are acceptable.
3
To Next Page
Loading...
