Krendl 500 - Page 39

Rev. Date: 3/14/18 Page 36
MODEL #500
NON SHREDDER
UPPER HOPPER and LOWER BASE UNIT ASSEMBLY
PARTS LIST
Item # Part # Description
20 561 Key, 1/4" x 1 1/4"
22 541 Pin, Hinge (2)
22-1 FSB080 Roll Pin, 5/32" x 5/8" (2)
23 2530-1 Latch, Bent, 5/16-18 x 2" Hex (2)
23-1 FW007 Washer, 5/16" - 18 Hex (2)
23-2 FN011 Nut, 5/16" - 18 Hex (2)
23-3 FN014 Nut, 5/16" - 18 Lock (2)
- - 189 #40 Half Link, 1 per Chain (not shown)
- - 199 #40 Connector/Master Link, 1 per Chain (not shown)
- - DCL500-1 Decal Set for 120 Volt machine (not shown)
- - DCL500-2 Decal Set for 240 and 230 Volt machines (not shown)