Rev. Date: 3/14/18 Page 4
MODEL #500
Manufacturer information is provided here
along with machine model, and serial number.
Identifies position of material feed gate.
DECALS
Emergency stop button for machine.
Keeping the filter clean will result in longer
blower life and better performances.
Rotating parts can be dangerous! You can snag clothes,
hair, hands, etc. This can cause serious injury or death.
General safety information intended to reduce
the risk of serious injury or death
Opens and closes the material feed gate
which in turn controls the production.
Made in the U.S.A.
Indicates if blower is off, on, or on with agitator.
Identifies what type of insulation should be used with this
machine and that the manual should be read before operat-
ing. Warns to be careful around electrical components!
This can cause serious injury or death.
To Next Page
Loading...