Need help?Do you have a question about the Kress Robotik KR101E and is the answer not in the manual?
Find a flat, dry surface out of direct sunlight for the charging base.
Connect the power adapter and dock the robot to charge.
Fasten the boundary wire near the charging base, ensuring it does not exceed 350m.
Lay down the boundary wire around the entire working area as illustrated.
Adjust the cutting height to the maximum level (60mm) before initial use.
Position the robot a few meters in front of the charging base for verification.
Turn on the robot and input the default PIN code 0000 for the first use.
Send the robot back to the charging base using the HOME and OK buttons.
Force the robot to end its work day using the HOME and OK buttons.
Procedure to change the robot's PIN code using the control panel buttons.
Configure the robot's internal clock for accurate scheduling.
Define the lawn area size to automatically adjust working time.
Customize the robot's daily mowing start time.
Instructions to download the app via QR code or app stores.
General| Model | KR101E |
|---|---|
| Category | Lawn Mower |
| Type | Robotic |
| Cutting Width | 18 cm |
| Cutting Height | 30-60 mm |
| Battery Type | Lithium-Ion |
| Battery Voltage | 20 V |
| Charging Time | 60 min |
| Working Time | 60 min |
To Next Page
