Kress Robotik Mission NANO

Other manuals for Kress Robotik Mission NANO

Quick Start Guide116 pages

Questions and Answers

F
fthorntonAug 17, 2025
Why is my Kress Robotik Mission NANO Lawn Mower cutting grass unevenly?
- T
  thomaslawrenceAug 17, 2025
  If your Kress Robotik Lawn Mower is cutting grass unevenly, it might not be working enough hours. To resolve this, add more hours to the scheduled mowing time. Also, consider decreasing the mowing area size or adding more mowing hours. Ensure the blades aren't dull by changing all blades and screws to balance the blade disc. If the cutting height is too low, raise it gradually. Remove any grass or objects wrapped around the blade disc, and clear any grass buildup in the blade disc or motor frame box to ensure easy rotation.
A
acunninghamAug 20, 2025
How to set the correct time on my Kress Robotik Mission NANO Lawn Mower?
- K
  Kenneth EstradaAug 20, 2025
  If your Kress Robotik Lawn Mower is not operating at the correct time, ensure the clock is set correctly using the app. Also, verify and correct the programmed cutting times. If the mower is manually docked, press START and then OK to resume automatic operation.
J
Jessica ClarkAug 23, 2025
What to do if Kress Robotik Mission NANO Lawn Mower runs outside the boundary wire?
- P
  pcareyAug 23, 2025
  If your Kress Robotik Lawn Mower runs outside the boundary wire, ensure there is at least 1 meter of space between your boundary wire and any neighboring boundary wires. Check the boundary wire for sharp corners and ensure they are smooth. Inspect boundary wire joints and insulate them to provide a waterproof connection. Repair any damaged insulation with connectors.
C
Charlene RyanAug 26, 2025
Why is the charging time so long for my Kress Robotik Mission NANO?
- T
  Timothy RobinsonAug 26, 2025
  If your Kress Robotik Lawn Mower's charging time is far more than 2 hours, clean the contact pins on the charging base and the charging strip on the mower with a cloth. If the charging protection program has activated due to high temperature, move the charging base to a shady area or wait for the temperature to cool down.
H
hilljessicaAug 28, 2025
Why do the wheels skid or damage lawn of my Kress Robotik Mission NANO Lawn Mower?
- J
  Jeffery LeonAug 28, 2025
  If your Kress Robotik Lawn Mower wheels skid or damage the lawn, remove any foreign objects lodged underneath the mower, such as twigs or branches. Also, wait until the lawn has dried if it is too wet.
D
Debra JacksonAug 30, 2025
Why does my Kress Robotik Mission NANO Lawn Mower have shorter run times?
- V
  Victoria ButlerAug 31, 2025
  If your Kress Robotik Lawn Mower is starting to have shorter run-times between charges, clean the blade disc. Check the blade disc and blades for debris and remove any foreign objects. If the battery is old, consider replacing it.
A
Anthony Reed DVMSep 3, 2025
What to do if Kress Robotik Mission NANO Lawn Mower cannot dock with charging base?
- D
  drew05Sep 3, 2025
  If your Kress Robotik Lawn Mower cannot correctly dock with the charging base, try restarting it. Clean the contact pins located on the charging base and the charging strip on the mower using a cloth.
C
Catherine DavisSep 5, 2025
Why does my Kress Robotik Mission NANO Lawn Mower vibrate?
- A
  Amber RobinsonSep 6, 2025
  If your Kress Robotik Lawn Mower vibrates, inspect the blades and replace them if damaged. Remove any debris or foreign objects from the blades and blade disc.
K
Kathleen RamirezSep 8, 2025
Why Kress Robotik Mission NANO Lawn Mower does not charge?
- P
  Patrick RuizSep 8, 2025
  If your Kress Robotik Lawn Mower does not charge, ensure the power cord is properly connected to the charger and that the charger is connected to a suitable power supply.
C
Cathy HarperSep 12, 2025
How to fix the LED light on the charging base of Kress Robotik Mission NANO Lawn Mower?
- N
  Nathan BakerSep 12, 2025
  If the LED light on the charging base of your Kress Robotik Lawn Mower does not turn on, check that the charging base is properly connected to the charger and that the charger is connected to a suitable power supply.