Kress Robotik Mission KR112 - User Manual

Kress Robotik Mission KR112

172 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Owner's Manual

Table of Contents

Questions and Answers

S
Susan JohnsonAug 2, 2025
Why does my Kress Robotik Lawn Mower run outside the boundary wire?
- M
  Mary MillerAug 2, 2025
  If your Kress Robotik Lawn Mower runs outside the boundary wire, doesn't mow within a zone, or reverses/rotates erratically, several factors could be at play. Ensure at least 1m spacing from other robotic mower boundary wires. Check for and smooth out any acute angles in your boundary wire installation. In wet conditions, inspect boundary wire joints and provide waterproof insulation. Repair any damaged boundary wire insulation with tape. Finally, if the cutting area exceeds MissionTM's capacity, decrease it.
D
Dr. Shawn Smith Jr.Aug 7, 2025
What to do if Kress Robotik Lawn Mower cannot dock with Charging base?
- A
  Ashley WoodsAug 7, 2025
  If your Kress Robotik Lawn Mower cannot correctly dock with the charging base, try these steps: First, restart the mower. Second, clean the contact pins on both the charging base and the mower using a cloth to remove any debris.
M
Michelle HessAug 12, 2025
What to do if Kress Robotik Lawn Mower exits the boundary wire on a hill?
- K
  Kenneth DavisAug 12, 2025
  If your Kress Robotik Lawn Mower exits the boundary wire due to high speed on a hill, it's likely because the boundary wire is placed on a slope steeper than 17% (10°). Reposition the boundary wire away from these steep slopes.
E
Eric ConwayAug 16, 2025
What to do if Kress Robotik Lawn Mower says “outside working area”?
- D
  Dustin BauerAug 17, 2025
  If your Kress Robotik Lawn Mower displays “outside working area” with a green LED while inside, the boundary wire ends are likely clamped incorrectly. Try reversing the boundary wire ends.
F
Fernando HernandezAug 22, 2025
Why is the green light flashing on my Kress Robotik Lawn Mower charging base?
- S
  shannonfernandezAug 22, 2025
  If the green light is flashing on the charging base of your Kress Robotik Lawn Mower, it indicates that the boundary wire isn’t connected. Ensure the boundary wire is correctly connected to the charging base and check for any breaks, especially at the wire ends.
L
Loretta RiveraAug 27, 2025
How to fix LED light on Kress Robotik Lawn Mower charging base not turning on?
- W
  Wanda RobertsAug 27, 2025
  If the LED light on the charging base of your Kress Robotik Lawn Mower doesn't turn on, the issue is likely due to a lack of power. Check that the charging base is properly connected to the charger, and that the charger is connected to a working power supply.

Summary

Product Safety

General Safety Warnings

Read all safety warnings and instructions. Failure to follow may result in injury or fire.

Safe Operation Practices

Instructions and precautions for safe operation, including training and preparation.

Operation

General Operation Guidelines

Guidelines for general operation of the robotic lawnmower, including safety.

Automatic Operation Specifics

Specific instructions for when the appliance is operating automatically.

Maintenance and Storage

General Maintenance Procedures

Procedures for cleaning and maintaining the robotic lawnmower.

Transporting the Robotic Lawnmower

Guidelines for safely transporting the robotic lawnmower.

Battery Pack Safety Warnings

Crucial safety information for handling and storing the battery pack.

Symbols

Operational Warning Symbols

Visual warnings related to robotic lawnmower operation and safety.

Appliance and Disposal Information Symbols

Symbols for appliance class, electrical waste, and battery disposal.

Component List

Lawmower Unit Components

Identifies numbered components on the main lawnmower unit.

Included Accessories and Parts

Lists and illustrates various accessories and parts included with the lawnmower.

Technical Data

Model Specifications Comparison

Provides technical specifications comparing KR112 and KR113 models.

Noise Data

Sound Level Information

Details sound pressure and power levels, and hearing protection advice.

Accessories

Accessory Quantities by Model

Lists quantities of accessories for KR112 and KR113 models.

Intended Use

Product Application Scope

Defines the intended use of the garden product as domestic lawn mowing.

Maintenance

Maintenance and Care Advice

General advice on maintaining the Mission™™ lawnmower.

Blade Replacement

Procedure for Replacing Blades

Step-by-step instructions for safely replacing the lawnmower blades.

Cleaning

Cleaning the Lawnmower Body

Instructions for cleaning the exterior of the robotic lawnmower.

Cleaning the Underside and Blades

Guidance on cleaning the underside, blade disc, and fixing screws.

Cleaning Charging Contact Pins

How to clean contact pins and charging strips for proper charging.

Battery Life and Charging

Battery Specifications and Care

Details on the 20V Li-Ion battery, storage, and operating temperature.

Charging the Lawnmower

Manual Charging Procedure

Steps for manually charging the robotic lawnmower without the boundary wire.

Winter Hibernation

Preparing for Winter Storage

Recommendations for cleaning, charging, and storing the lawnmower for winter.

Replacing the Battery

Battery Replacement Steps

Step-by-step instructions for safely removing and replacing the battery.

Troubleshooting

Common Symptoms and Solutions

Guides on identifying and resolving common issues with the robotic lawnmower.

Environmental Protection

Waste Disposal Information

Information on proper disposal of waste electrical products and recycling.

Declaration of Conformity

Product Compliance Information

Declaration of product conformity with relevant directives and standards.

Kress Robotik Mission KR112 Specifications

General

Typical Run Time	60 min
Typical Charge Time	60 min
Charging Time	60 min
Operating Time	60 min
Battery Type	Li-Ion
Blade Type	3 blades

Related product manuals

Kress Robotik Mission KR113

Preview: Kress Robotik Mission NANO

Kress Robotik Mission NANO

Kress Robotik KR101E