KROHNE IFC 010 F User Manual

Installation and
operating
intructions
Signal converters
for
electromagnetic flowmeters
04/98
How to use these Instructions
The flowmeters are supplied ready for operation.
The primary head must be installed in the pipeline as described in the installation
instructions inside the packing of the primary head.
- Installation location and connection to power (Section 1) Pages 1/1-1/6
- Electrical connection of outputs and inputs (Section 2) Pages 2/1-2/6
- Factory settings and start-up (Section 3) Pages 3/1-3/2
- Operator control of the signal converter is described in Sections 4 and 5.
Power the flowmeter. THAT’S ALL. The system is operative.
16-page pull-out condensed instructions
are located in the centrefold of these Installation and Operation Instructions.
Contents:
Installation (Sect. 1), electrical connection (Sect. 1 + 2),
start-up (Sect. 3) and operator control of the signal converter (Sect. 4)
3.1M61EA4 049821 Order No. 7.02140.34.00
US size: 7.02140.74.00
IFC 010 K
IFC 010 F
Applicable to
Software Versions
••
IFC 010
_
/ D
Display version
No. 806325.07
and
No. 317551.02
and higher
••
IFC 010
_
/ B
Basic version
operator-controllable
with HHT 010
No. 806323.06
and higher

KROHNE IFC 010 F Specifications

General

Brand	KROHNE
Model	IFC 010 F
Category	Media Converter
Language	English

Summary

Part A System installation and start-up

Electrical Power Supply Connection

Details on connecting the signal converter to the power source.

Output Connections

Specifies connections for current, pulse, and status outputs.

Start-up and Factory Settings

Covers initial power-on, measurement process, and factory settings.

Part B IFC 010_/D Signal converter

Signal Converter Operation

Explains user interaction and control of the IFC 010_/D signal converter.

Functions Description

Provides detailed explanations of the converter's various functions and parameters.

Part C Special applications, functional checks, service, and order numbers

Special Applications

Covers optional external controls and specific application configurations.

Functional Checks

Procedures for verifying the correct functionality of the signal converter.

Service and Maintenance

Instructions for housing cleaning, fuse replacement, and component repair.

Part D Technical data, measuring principle and block diagram

Technical Data

Lists specifications including flow ranges, units, dimensions, and electrical data.

Measuring Principle and System Function

Explains the Faraday's law of induction principle used in the flow measurement.

Signal Converter Block Diagram

Visual representation of the signal converter's internal components and signal flow.