KROHNE IFC 010 K - User Manual

Installation and
operating
intructions
Signal converters
for
electromagnetic flowmeters
04/98
How to use these Instructions
The flowmeters are supplied ready for operation.
The primary head must be installed in the pipeline as described in the installation
instructions inside the packing of the primary head.
- Installation location and connection to power (Section 1) Pages 1/1-1/6
- Electrical connection of outputs and inputs (Section 2) Pages 2/1-2/6
- Factory settings and start-up (Section 3) Pages 3/1-3/2
- Operator control of the signal converter is described in Sections 4 and 5.
Power the flowmeter. THAT’S ALL. The system is operative.
16-page pull-out condensed instructions
are located in the centrefold of these Installation and Operation Instructions.
Contents:
Installation (Sect. 1), electrical connection (Sect. 1 + 2),
start-up (Sect. 3) and operator control of the signal converter (Sect. 4)
3.1M61EA4 049821 Order No. 7.02140.34.00
US size: 7.02140.74.00
IFC 010 K
IFC 010 F
Applicable to
Software Versions
••
IFC 010
_
/ D
Display version
No. 806325.07
and
No. 317551.02
and higher
••
IFC 010
_
/ B
Basic version
operator-controllable
with HHT 010
No. 806323.06
and higher

Summary

Signal converters for electromagnetic flowmeters

How to use these Instructions

IFC 010 Signal Converter Versions

Part A System Installation and Start-up

1 Electrical Connection: Power Supply

Details on connecting the power supply to the signal converter.

Primary Head Connection and Grounding

1.3.1 Signal and Field Cable Information

1.3.2 Primary Head Grounding Procedures

Electrical Connection of Outputs

2.1 Current Output I

2.2 Pulse Output P and Status Output S

3 Start-up

3.1 Power-on and Measurement

Steps for powering on the unit and initiating process flow measurement.

Factory Settings

Part B IFC 010_;D Signal Converter Operation

4 Operation of the Signal Converter

Covers the overall operation of the IFC 010_/D signal converter.

4.1 Krohne Operator Control Concept

4.2 Operating and Check Elements

4.4 Table of Settable Functions

5 Description of Functions

5.1 Full-scale Range Q100%

Part C Special Applications and Service

6 Special Applications

Covers special application notes and external control options.

6.1 External Control Options (HHT;RS232)

7 Functional Checks

7.1 Zero Check Procedure

Step-by-step guide for performing a zero check on the converter.

7.2 Measuring Range Q Test Procedure

Procedure for testing the measuring range (Q) of the flowmeter.

7.4 Faults and Symptoms

7.5 Test of Primary Head

7.6 Test of Signal Converter

Service Procedures

8.2 Replacement of Power Fuse(s)

Part D Technical Data

10 Technical Data Overview

General technical specifications and data for the flowmeter.

10.1 Full-scale Range Q100%

11 Measuring Principle and System Function

KROHNE IFC 010 K Specifications

General

Brand	KROHNE
Model	IFC 010 K
Category	Media Converter
Language	English